Sam4s ER-260EJ - Z Mode Functions; Overview of Z Mode

Sam4s ER-260EJ/256EJ OP Manual v1.20 Z Mode • 79
Z Mode
Overview
All Management Functions take place with the control lock in the X or Z position. In this way, only
those with the correct key will have access to these functions.
The following procedures are done from the Z mode menu:
 Z Reports
 Reset Electronic Journal
 Reset Not Found PLU List
 Connect Server
 Datatran Function
 Datatran Transaction
Accessing Z Mode Functions
1. Move the key to the Z lock position to display the Z Mode menu.
Z MODE
1.Z REPORTS
2. You can now use the CHARGE1 and the CHARGE2 keys to scroll up and down
through the Z Mode menu. Or, if you already know the menu number of the X
Mode function you with to perform, you can enter the digit (1-6) directly.
The following Z Mode functions are available:
1.Z REPORTS
2.RESET E.J
3.RESET NOT FOUND PLU
4.CONNECT SERVER
5.DATATRAN FUNCTION
6.DATATRAN TRANSACTION