82 • Z Mode Sam4s ER-260EJ/256EJ OP Manual v1.20
Reset Electronic Journal
An electronic journal feature is available on the ER-260EJ/ER-265EJ. The electronic journal
captures the sales journal in the register memory. If you intend to use the electronic journal, you must
allocate sufficient memory (see "ALLOCATION" in the "Service Mode Programming” chapter) and
activate the journal and set related journal capture options (see "EJ" of "Options Programming" in the
"Program Mode Programming" chapter.)
Use this procedure to clear the journal memory. The journal will not be printed. To read all or
selected parts of the E.J., see "Electronic Journal Operation" in the "Manager Mode (X Mode)"
chapter.
1. Move the key to the Z lock position to display the Z Mode menu.
2. From the Z Mode menu press CHARGE1 to select the “2.RESET E.J” option (or
press 2 to display the option directly):
3. Press CASH.
ARE YOU SURE?
Y=CASH N=CLEAR
4. The screen asks: ARE YOU SURE? Press the CASH key for YES or CLEAR key
for NO to clear the report.
Reset Not Found PLU
If a PLU number is input, or scanned, that is not programmed in the PLU file, the operator has the
option to input the price of the item and assign it the same descriptor and properties of another PLU.
Up to 50 “Not Found” entries can be recorded, when capacity is reached, the memory must be
cleared.
1. Move the key to the Z lock position to display the Z Mode menu.
2. From the Z Mode menu press the CHARGE1 key until “RESET NOT FOUND” is
selected (or press 3 to view the option directly.)
3. Press CASH.
ARE YOU SURE?
Y=CASH N=CLEAR
4. The screen asks: ARE YOU SURE? Press the CASH key for YES or CLEAR key
for NO to clear the report.
To Next Page
Loading...
