Sam4s ER-260EJ - Control Lock Functionality

Sam4s ER-260EJ/256EJ OP Manual v1.20 Introduction • 19
Control Lock
The control lock has 7 positions, accessed with 5 keys. Each ECR is shipped with two full sets of
keys.
VOID Use to void (correct) items outside of a sale.
OFF The register is inoperable.
REG Use for normal registrations.
X Use to read register reports.
Z Use to read register reports and reset totals
to zero.
PGM Use to program the register.
S Use for secure programs and dealer access.
Before performing any Register Mode operations, a clerk must be signed on. See “Clerk Sign-
On/Sign-Off” for a description of clerk operations.
Control Keys
All ER-260EJ/ER-265EJ cash registers include two sets of keys that may be used to access the
following control lock positions.
Key Positions Accessible
REG OFF, REG
VD VOID, OFF, REG, X
Z VOID, OFF, REG, X, Z
P VOID, OFF, REG, X, Z, PGM
C ALL POSITIONS
Note: Keys may be removed from the control lock in the OFF or REG positions.
VOID
P
GM
Z
X
REG
OFF
S