Sam4s ER-260EJ - USB Setting

92 • Service Mode Programming Sam4s ER-260EJ/256EJ OP Manual v1.20
USB Setting
1. Move the key to the S lock position to display the Service Mode menu.
2. From the Service Mode menu press CHARGE1 until “DEFINE PORT” is selected
(or press 5 to view the option directly.)
3. Press CASH. The DEFINE PORT menu displays:
DEFINE PORT
1.PORT 1
4. Use CHARGE1 key to select “4.USB TYPE” or press 4. Then press CASH to set
the USB port:
DEVICE: MEMORY
MEMORY 
5. Use CHARGE1and the CHARGE2 keys to select a USB type (PC COM,
SCANNER, or MEMORY) and press the CASH key to confirm.
Note: If you select a new type, your ER-260EJ/ER-265EJ will be automatically reboot.
USB Specifications
USB TYPE USB VERSION SPEED
PC-COM For connecting PC - -
SCANNER For using scanner
USB 2.0
(only HID type)
FULL SPEED
MEMORY For backup & restore USB 2.0 FULL SPEED