Sam4s ER-260EJ - Datatran Function; Datatran Function: Menu Operations

Sam4s ER-260EJ/256EJ OP Manual v1.20 Integrated Payment Appendix • 203
Datatran Function
1. Move the key to the Z lock position to display the Z Mode menu.
2. You can now use the CHARGE1 and the CHARGE2 keys to scroll up and down through
the Z Mode menu (or press 5 and CASH) to select the Datatran Transaction menu with the
first option displayed:
1 .IN ITIALIZE EF T
2 .CL OSE CURR . B A T CH
3 .PA RAMETER DOW N L OAD
4 .EM V EBT VO UCH E R
5 .IS SUE TRAN SAC T I ON
6 .IS SUE BATC H S T A TUS
7 .DI AL IN LO AD
8 .DI AGNOSTIC
Datatran Function: Menu Operations
EMV related operations are shown in Bold below; Follow the summary table for details for each of
these processes.
Menu
#
Item Operation
1. Initialize EFT Use this operation to initialize the PIN-Pad device.
2. Close Curr. Batch
Use this operation to close the current batch; a new
batch is automatically opened.
3.
Parameter
Download
Use to load the EMV parameters into the PIN-Pad.
4. EMV EBT Voucher Used to Manually enter EBT transactions.
5.
Issue Transaction
Currently, if a Local Transaction Report is run we
print the information from the approvals. However,
this data should only be used for troubleshooting and
should not be relied upon as accurate reporting data.
6.
Issue Batch Status Print the status for the current batch.
7.
Dial In Load
This procedure must be done at each new installation
to load the Datatran device parameters.
8.
Diagnostic
Use to perform various diagnostics. Use only as
requested by Datacap support.