Sam4s ER-260EJ - CHARGE Key Options

Sam4s ER-260EJ/256EJ OP Manual v1.20 Program Mode Programming • 127
CHARGE 1-8 Key Function Options
Option Entry Description
1 DESC
Alpha numeric
24 characters
You can program a unique descriptor. The default descriptors
are CHARGE 1-8.
2 HALO 7-digit amount
You can limit errors by setting the maximum amount that can
be tendered. "0" means that there is no entry limit.
3
AMOUNT TEND
COMP.
Y or N
Select Y if you want to force the operator to enter the tendered
amount and let the register calculate the change.
4
OVER/UNDER
TENDER IN MGR
CONTROL
Y or N
Select Y if you do not want the operator to tender more than
the amount of the sale and issue change. When selected, over
tendering is allowed only in the MANAGER MODE.
5
DISABLE UNDER
TEND.
Y or N
Select Y if you do not want the operator to tender less than the
amount of the sale.
6
DOES DRAWER
OPEN
Y or N
Select N if you do not want the drawer to be opened with this
key.
7
ALLOW OVER
TEND.
Y or N
Select Y if you wish to allow tender greater than the amount of
the sale.
8
NON-ADD # ENTRY
COMPULSORY
Y or N
Select Y if you wish to enforce the entry of a non-add number
prior to tendering.
9 -
12
EXEMPT TAX 1 –
TAX4
Y or N
Select Y to exempt the appropriate tax automatically when
finalized with this key.
13
COMPULSORY
VALIDATION
Y or N
Choose Y to enforce validation if an optional printer with
validation capability is connected to a Serial port.
14 SEND TO EFT
Y or N
Select Y if IPTran LT is connected for integrated credit.
15 EFT PORT (0-3)
Y or N
Enter the number for the port where the EFT IPTran is
connected.
16 ALLOW ROUNDING Y or N
Select Y you wish to allow rounding when pressing the
CHARGE1~CHARGE8 key.
17
SELECT CARD
TYPE
Y or N
None, Credit, Debit, Gift, Gift No NSF, Cash Benefit
18 SHOW TIP ON
Y or N
REG
PINPAD
PRINT TIP LINE ONLY