74 • Manager Mode (X Mode) Sam4s ER-260EJ/256EJ OP Manual v1.20
Training Mode
A training mode is available so that the register can be operated to practice registrations without
updating totals and counters. If you choose to use training mode, you must set a training mode
password (see “TRAIN MODE” of the “Options Programming” in the "Program Mode
Programming" chapter.)
1. Move the key to the X lock position to display the MANAGER MODE menu.
2. Press CASH to display the X Mode menu.
3. Press CHARGE1 three times or press 4 to display the “Set Train Mode” option:
X MODE
4.SET TRAIN MODE
4. Press CASH to select the training mode status, start training mode or end training
mode:
SET TRAIN MODE
START:1 / END:0
5. Enter 1 to start training mode (if you have selected a training mode password, you
will be prompted to enter to programmed password.) or enter 0 to end training mode.
A chit will print indicate you are starting or ending training mode.
To Next Page
Loading...
