88 • Service Mode Programming Sam4s ER-260EJ/256EJ OP Manual v1.20
Memory Allocation
Note: You must step through every memory allocation field to implement new memory
allocation. If you press CLEAR, at any field you will abort memory allocation processes
without making changes. Changes to Memory Allocation will clear all program data.
1. Move the key to the S lock position to display the Service Mode menu.
2. From the Service Mode menu press the CHARGE1 key until “ALLOCATION” is
selected (or press 3 to view the option directly.)
3. Press CASH. The first memory allocation option, PLU, displays:
PLU
1000
4. At the PLU field enter a new value, or accept the current value and press CASH. The
next memory allocation option, CLERK, displays.
5. Set or accept the CLERK value, press CASH. Continue in the same way to make
allocation settings for GROUP, PRICE LEVEL, MIX AND MATCH, and EJ LINE.
When the last setting is completed the screen will ask:
ARE YOU SURE?
Y=CASH N=CLEAR
6. Press the CASH for YES or the CLEAR for No.
7. The message will print either: "MEMORY ALLOCATION OK" or "MEMORY
ALLOCATION SIZE OVER" if you attempt to allocate features requiring more
memory than is available.
DEFAULT Memory Allocation Specifications
ALLOCATION ITEM DEFAULT
MAXIMUM
PLU 1000
3200
CLERK 10
99
GROUP 10
99
PRICE LEVEL 1
2
MIX AND MATCH 20
100
EJ LINE 1000
15000
To Next Page
Loading...
