Sam4s ER-260EJ/256EJ OP Manual v1.20 Program Mode Programming • 133
MODIFIER 1-5 Key Function Options
Option Entry Description
1 DESC
Alpha
numeric
24 character
You can program a unique descriptor. The default descriptors
are MOD1 - MOD5.
2
UNDER
MANAGER
CONTROL
Y or N
Select Y if you do not want the operator to use this function
in REGISTER MODE. When selected, the function is
allowed only in the MANAGER MODE.
3 AFFECT PLU # Y or N
Select Y, if you wish the modifier entry to modify the PLU
and cause a different item/price to be registered. Select N to
only add the modifier descriptor.
4
PRINT ON
RECEIPT
Y or N
Select N to suppress printing of the modifier descriptor on the
receipt.
5
AFFECT DIGIT OF
PLU #
1-14
Preceding a PLU with a Size and/or Modifier key manipulates
the PLU code assigned to the PLU key, causing a different
PLU to be registered when the PLU key is pressed. Enter the
digit of the PLU number you wish to be changed when using
this key. (Digit #1 is the rightmost digit; digit #14 is the
leftmost digit.)
6
VALUE OF
AFFECTED DIGIT
(0-9)
0-9
Enter the value you wish to be added in the digit position
selected. For example: if you wish to affect PLU digit #4
with a value of 1, then pressing this modifier key prior to the
registration of PLU #17 will result in the registration of PLU
#1017.
PAID OUT 1-3 Key Function Options
Option Entry Description
1 DESC
Alpha numeric
24 character
You can program a unique descriptor. The default descriptors
are PO 1-3.
2 HALO 7-digit amount
You can limit errors by setting the maximum amount that can be
used with this function. "0" means that there is no entry limit.
3 KEY DISABLE Y or N Select Y to disable this function.
4
UNDER MANAGER
CONTROL
Y or N
Select Y if you do not want the operator to use this function in
REGISTER MODE. When selected, the function is allowed
only in the MANAGER MODE.
5
COMPULSORY
VALIDATION
Y or N
Choose Y to enforce validation if an optional printer with
validation capability is connected to a Serial port.
To Next Page
Loading...
