Sam4s ER-260EJ - VOID Key Function Options; WASTE Key Function Options

Sam4s ER-260EJ/256EJ OP Manual v1.20 Program Mode Programming • 137
VOID Key Function Options
Option Entry Description
1 DESC
Alpha
numeric
24 character
You can program a unique descriptor. The default descriptor
is VOID.
2 HALO
7-digit
amount
You can limit errors by setting the maximum amount that can
be used with this function. "0" means that there is no entry
limit.
3 KEY DISABLE Y or N Select Y to disable this function.
4
UNDER
MANAGER
CONTROL
Y or N
Select Y if you do not want the operator to use this function
in REGISTER MODE. When selected, the function is
allowed only in the MANAGER MODE.
5
COMPULSORY
VALIDATION
Y or N
Choose Y to enforce validation if an optional printer with
validation capability is connected to a Serial port.
WASTE Key Function Options
Option Entry Description
1 DESC
Alpha
numeric
24 character
You can program a unique descriptor. The default descriptor
is WASTE.
2 HALO
7-digit
amount
You can limit errors by setting the maximum amount that can
be used with this function. "0" means that there is no entry
limit.
3 KEY DISABLE Y or N Select Y to disable this function.
4
UNDER
MANAGER
CONTROL
Y or N
Select Y if you do not want to allow the operator use of this
function in REGISTER MODE. When selected, the
function is allowed only in the MANAGER MODE.
5
COMPULSORY
VALIDATION
Y or N
Choose Y to enforce validation if an optional printer with
validation capability is connected to a Serial port.