Sam4s ER-260EJ - VALIDATION Key Function Options

Sam4s ER-260EJ/256EJ OP Manual v1.20 Program Mode Programming • 139
VALIDATION Key Function Options
Option Entry Description
1 DESC
Alpha
numeric
24 character
You can program a unique descriptor. The default descriptor
is PRICE CHG.
2
SLIP OUTPUT
PORT
0-3
If validation is used, identify the communications port (1-3)
where the validating printer is attached. Enter 0 if validation is
not used.
3 KEY DISABLE Y or N Select Y to disable this function.
4
ALLOW
MULTIPLE
RECEIPT
Y or N Select Y to allow multiple validations of the same transaction.