Sam4s ER-260EJ - Page 161

Sam4s ER-260EJ/256EJ OP Manual v1.20 Program Mode Programming • 161
Programming a Tax Table
1. Move the mode key to the P position to display the Program Mode menu.
2. Use the CHARGE1 and the CHARGE2 keys to select “7.TAXES” (or press 7 to go
to the option directly.) Press CASH to view the Tax Number selection screen.
ENTER TAX#
(1-4) 0
3. Enter the Tax number you want to program and press the CASH; the tax Descriptor field
displays:
TAXES
1.DESC : [TAX3]
4. Press CASH to enter a descriptor if desired, then press CASH or just Press CHARGE1
to select the TAX TYPE:
TAXES
2.TYPE [TAX TABLE]
5. At the TAX TYPE field, use the CHARGE1 and the CHARGE2 keys to select the
TAX TABLE; press CASH key to confirm. The tax ‘RATE’ field displays:
TAXES
3.RATE [0.000]
6. Press CASH to view the ‘NON-TAX AMOUNT’ entry field:
TAX TABLE3
NONTAX AMT 0.10
7. Enter maximum non-taxable amount then Press CASH; The ‘1
ST
TAX AMOUNT’ field
displays:
TAX TABLE3
1
S T
TAX AM 0.01
8. Enter the amount of the first tax that will be charged (typically 1¢) then Press CASH;
The ‘NON-REPEAT BREAK’ entry filed displays:
NON-REPEAT BREAK
[1] 0.21
9. Enter the first Non-Repeat Break and press CASH.
10. Continue entering all the Non-Repeat Breaks, when you have entered the last Non-Repeat
Break press CASH; at the next field don’t enter a value, just press CASH. The ‘REPEAT
BREAK’ entry field displays:
REPEAT BREAK
[3] 1.41
11. Enter the first Repeat Break and press CASH;
12. Continue entering all the Repeat Breaks, when you have entered the last Repeat Break
press CASH; at the next field don’t enter a value, just press CASH.
13. Continue to program additional taxes or press CLEAR to return to the PROGRAM
MODE screen.