Sam4s ER-260EJ - Page 191

Sam4s ER-260EJ/256EJ OP Manual v1.20 Integrated Payment Appendix • 191
 Tips cannot be edited/added to Debit transactions after the sale.
 No TIP entry is allowed for GIFT Card transactions. Tips must be entered using a PLU
prior to finalization with a Gift Card.
 When using IPTran LT terminals at each register, tips must be entered at the terminal
the transaction was registered on.
Datatran Tip Key
Firmware versions supporting EMV provide DataTran TIP function key (key code 416) for entering
TIP’s in register mode. If your application is set for “Fine Dining” you can place this function on the
keyboard to speed up the TIP entry. The key can be programmable for manager control if desired.
1. Move the key to the P lock position to display the Program Mode menu.
2. Press the CHARGE1 twice to select “3.FUNCTION KEY” and press CASH or press 3
and CASH to display the FUNCTION KEY screen.
FUNCTION KEY
1.FUNCTION KEY
3. Press 1 and CASH to select FUNCTION KEY menu.
ENTER FUNC.KEY
TO BE PROGRAMMED
4. Press the “DATARAN TIP” key to program the settings.
5. Use the CHARGE1 and the CHARGE2 keys to scroll up and down through the
options for the function key you have selected.
6. Select an option and press the CASH to set that option value.
7. From the YES/No type option screen, Press the CHARGE2 key for YES and the
CHARGE1 key for NO. Press the CASH to confirm the option selection
DataTran TIP Key Options
Option Entry Description
1 DESC
Alpha numeric
24 character
You can program a unique descriptor. The default descriptors
are CHARGE 1-8.
2
Under manager
control
Y or N
Select Y to allow TIP operations only in X position manager
mode.
3 SEND TO EFT Y or N Set to Y for integrated payment EFT/EMV operations.