Sam4s ER-260EJ - Page 99

Sam4s ER-260EJ/256EJ OP Manual v1.20 Service Mode Programming • 99
Copy the Images to an SD/USB Card
The PC Utility will create two image files:
 USERPRE.IMG
 USERPOST.IMG
They will be located on your PC at:
C:\MyDocuments\eSpresso\Store name\register name\IMAGE
Copy the images to the following path on your SD or USB:
\\ER-260EJ/ER-265EJ\Storename\IMAGE
Important: In the path: C:\MyDocuments\eSpresso\Store name\register name\IMAGE, the
store name is the name you have defined as the store in the PC Utility.
Note: You must use the same store name in the ER-260EJ/ER-265EJ ECR at “Store name” of
“SYSTEM” of the “Options Programming” in the “Program Mode Programming”. Note that the
default store name is “STORE001”.