Sartorius Cubis MCE - Protective Caps on the Electronics; Module; Conformity-Assessed Devices

18 Operating Instructions Cubis
®
MCE
Device Description
3.7.2 Protective Caps on the Electronics Module
1 2 3 4
5
Fig. 9: Protective caps on the electronics module
Pos. Name Description
1 Protective cap fo USB-A connection Plastic attachment hood, fastened to the device.
2 Protective cap for USB-B connection Plastic attachment hood, fastened to the device.
3 Protective cap for COM-RS232 connection Removable plastic sealing cap.
4 Protective cap for access switch Removable plastic sealing cap.
5 Protective caps for peripheral connection Removable plastic sealing caps.
3.8 Conformity-assessed Devices
Some settings of conformity-assessed models are protected against user changes, e.g. external calibration for devices
in accuracy class II. This measure is intended to ensure the suitability of the devices for use in legal metrology.