Sartorius Cubis MCE - Models MCE3203 S | MCE2203 S | MCE2203 P | MCE1203 S

88 Operating Instructions Cubis
®
MCE
Technical Data
15.7.4 Models MCE3203S | MCE2203S | MCE2203P | MCE1203S
MCE3203S MCE2203S MCE2203P MCE1203S
Unit Value Value Value Value
Scale interval (d) mg 1 1 1 | 10 1
Maximum capacity (Max) g 3200 2200 1010 | 2200 1200
Repeatability at 5% load
Standard deviation of the load values,
tolerance
mg 1 0.7 0.7 0.7
Standard deviation of the load values,
typical value
mg 0.5 0.5 0.5 0.5
Repeatability at approx. maximum capacity
Standard deviation of the load values,
tolerance
mg 1 1 1 0.7
Standard deviation of the load values,
typical value
mg 0.6 0.6 0.6 0.6
Linearity deviation
Tolerance mg 5 3 5 2
Typical value mg 2 2 3 1
Deviation when load is off-center, positions
according to OIML R76
Test weight g 1000 1000 1000 500
Tolerance mg 2 2 3 2
Typical value mg 1 1 2 1
Sensitivity drift between +10°C and +30°C ppm/K 1 1 1 1.5
Tare-maximum capacity: Less than 100 %
of maximum capacity
Accuracy class according to Directive
2014/31/EU
I I I I
Verification scale interval (e) according to
Directive 2014/31/EU
mg 10 10 10 10
Minimum load (Min) according to Directive
2014/31/EU
mg 100 100 100 100
Minimum initial weighing according to USP
(United States Pharmacopeia), Chap. 41
Optimum minimum initial weighing mg 820 820 820 820
Typical minimum initial weighing mg 1000 1000 1000 1000
Typical stabilization time s 1 1 1 1
Typical measurement time s 2 1.5 1.5 1.5