Sartorius Cubis MCE - Accessories; Printers and Communication; Displays and Input | Output; Elements

92 Operating Instructions Cubis
®
MCE
Accessories
16 Accessories
16.1 Accessories
This table contains an excerpt of the accessories that can be ordered.
For information on other products, contact Sartorius.
16.1.1 Printers and Communication
Item Quantity Order number
Thermal transfer | thermal printer for
GLP | GMP printouts on continuous paper
and labels
1 YDP30
Display cable, 3 m, for separate installation of
display and weighing units, installation by
Sartorius Service or at the factory
1 VF4754
Installation of display cable, 3 m, for separate
installation of display and weighing units
1 VF4016
Cable, 3 m, between the weighing module
and electronics module for semi-
microbalance
1 YCC01-MSM3
RS232C connection cable, 9-pin, 3 m, for
connection to a PC with 9-pin COM port
1 VF4761
Sartorius Wedge, software for data
communication between the PC and balance
1 YSW02
Second display 1 YSD01
16.1.2 Displays and Input | Output Elements
Item Quantity Order number
MCA operating display with color TFT display,
touch screen and removable palm-operated
keys, for devices with automatic draft shield
1 69MS0212
MCA operating display with color TFT display
and touch screen, for devices with manual
draft shield
1 69MS0215
MCA operating display with color TFT display
and touch screen, for high-capacity precision
balances, including adapter for short
distances
1 69MS0216
Motion sensor for triggering a maximum of
4 functions via gesture control, selection via
menu
1 YHS02MS