Sartorius Cubis MCE - About These Instructions; Scope; Symbols Used; Warnings in Operating Instructions

6 Operating Instructions Cubis
®
MCE
About these Instructions
1 About these Instructions
1.1 Scope
These instructions are part of the device. These instructions apply to the
device in the following versions:
Device Model
Cubis
®
semi-microbalance, with
manual or motorized draft shield,
with or without ionizer
MCE125P-... | MCE125S-... |
MCE225P-... | MCE225S-...
Cubis
®
analytical balance, with
manual or motorized draft shield,
with or without ionizer
MCE124S-... | MCE224S-... |
MCE324P-... | MCE324S-... |
MCE524P-... | MCE524S-...
Cubis
®
precision balance, with
frame draft shield, flat glass draft
shield, manual or motorized draft
shield, with or without ionizer
MCE1203S-... | MCE2203P-... |
MCE2203S-... | MCE3203S-... |
MCE323S-... | MCE5202S-... |
MCE5203P-... | MCE5203S-... |
MCE623P-... | MCE623S-...
1.2 Symbols Used
1.2.1 Warnings in Operating Instructions
WARNING
Denotes a danger with the risk that death or severe injury may result if it is
not avoided.
CAUTION
Denotes a hazard that may result in moderate or minor injury if it is not
avoided.
NOTICE
Denotes a danger with the risk that property damage may result if it is not
avoided.
1.2.2 Other Symbols
t
Required action: Describes actions which must be carried out.
y Result: Describes the result of the actions carried out.
[ ] Text inside brackets refers to control and display items.
[ ] Text inside brackets indicates status, warning, and error
messages.
Indicates information for legal metrology for conformity-
assessed (verified) devices. Conformity-assessed devices are
also referred to as “verified” in these instructions.