Sartorius Cubis MCE - Hardware for Pipette Calibration; Filter Balance and Antistatic; Accessories; Density Determination Sets

Operating Instructions Cubis
®
MCE 93
Accessories
16.1.3 Hardware for Pipette Calibration
Item Quantity Order number
Pipette calibration kit for semi-microbalance
and analytical balance; consists of a moisture
trap and all necessary adapters
1 YCP04MS
16.1.4 Filter Balance and Antistatic Accessories
Item Quantity Order number
Antistatic weighing pan, 130 mm diameter, for
weighing module for semi-microbalance and
analytical balance
1 YWP04MS
Ionization blower for electrostatically charged
samples
1 YIB01-0DR
Stat-Pen ionization pen for discharging
electrostatically charged samples
1 YSTP01
Ionizer
with u-shaped electrode for 230 V 1 YIB02-230V
with u-shaped electrode for 115 V 1 YIB02-115V
16.1.5 Density Determination Sets
Item Quantity Order number
Density determination set for solids and
liquids
for semi-microbalance and analytical
balance
1 YDK03MS
for precision balance with 1 mg scale
interval
1 YDK04MS
Q-Grid pan for models with a scale interval of
10 mg or 100 mg for weighing in laboratory
hoods, at safety barriers, and at workbenches –
weighing pan with reduced wind attack surface,
designed to replace standard weighing pan
1 YWP07MS
16.1.6 Weighing Tables
Item Quantity Order number
Weighing table
made from synthetic stone, with vibration
dampening
1 YWT03
made from wood with synthetic stone 1 YWT09
Wall console 1 YWT04