Sartorius Cubis MCE - Parameters in the Device Main Menu

Operating Instructions Cubis
®
MCE 47
System Settings
Parameters in the “General Services” Submenu
Parameters Setting values Explanation
MEN.RESET YES Resets the system settings to the factory default settings.
NO* Deactivates the option of resetting the device menu.
* Factory setting
7.3.2 Parameters in the “Device” Main Menu
Parameters in the “Extras” Submenu
Parameters Setting values Explanation
MENU EDITABLE* Activates write access: The menu parameters can be changed.
RD.ONLY Activates read access: The menu parameters cannot be changed.
SIGNAL OFF Switches the acoustic signal off.
QUIET Sets the volume of the acoustic signal to “quiet”.
MEDIUM* Sets the volume of the acoustic signal to “medium”.
LOUD Sets the volume of the acoustic signal to “loud”.
KEYS UNLOCKED* Deactivates the key lock.
LOCKED Activates the key lock. Only the [On|Off], [Menu], [Zero], and [Tare] keys
can be used.
ON MODE ON/STDBY* − The [On | Off] key switches between on | standby.
− Switch on with the [On|Off] key.
ON/OFF − The [On | Off] key switches between on | off.
− Switch on with the on key.
AUTO ON Changes the function of the [On | Off] key: The device no longer switches
off or to standby mode, instead it starts a boot process.
LIGHTING OFF Deactivates the lighting on the operating display.
ON* Activates the lighting on the operating display.
* Factory setting
Parameters in the “Draft Shield” Submenu (Only for Devices with a Motorized Draft Shield)
Parameters Setting values Explanation
CONTROL OFF Deactivates the [Change] key for the motorized draft shield.
ON* Activates the [Change] key for the motorized draft shield.
IONIZER OFF* Deactivates the ionizer when the draft shield is in use.
ON Closing the draft shield activates the ionizer.
* Factory setting