Sartorius Cubis MCE - Page 4

4 Operating Instructions Cubis
®
MCE
Contents
7.3.4 Parameters in the
“Applications” Main Menu............54
7.3.5 Parameters in the
“Input” Main Menu ...................56
7.3.6 Parameters in the
“Language” Main Menu ..............57
7.3.7 Parameters in the “Unit 1”, “Unit 2”,
“Unit 3”, and “Unit 4” Application
Menus................................57
8 Operation.........................................58
8.1 Switching the Device On and Off............58
8.2 Leveling the Device..........................58
8.2.1 Leveling a Device with
Motorized Feet.......................58
8.3 Opening and Closing the Motorized Draft
Shield (Only for Devices with a Motorized
Draft Shield) .................................59
8.4 Preparing Weighings ........................59
8.5 Weighing ....................................60
8.6 Overview of Calibration, Adjustment,
and Linearization ............................60
8.7 Adjusting with the isoCAL Function ..........61
8.8 Internally Calibrating and Adjusting the
Device .......................................62
8.9 Externally Calibrating and Adjusting
the Device (Not for Conformity-assessed
Models) ......................................63
8.10 Printing Results..............................65
8.11 Weighing and Printing with ID Marking......65
8.12 Turning the Ionizer On | Off (Optional).......66
8.13 Running Applications (Examples) ...........66
8.13.1 Executing the “Toggle Between
Weight Units” Function ..............66
8.13.2 Running the “Statistics” Application.. 67
9 Cleaning and Maintenance .......................69
9.1 Preparing a Device with an Analytical Draft
Shield or Flat Glass Draft Shield .............69
9.2 Preparing a Device with a Frame Draft
Shield ........................................70
9.3 Cleaning the Device .........................70
9.4 Assembling and Connecting the Device......71
9.5 Maintenance Schedule .......................71
9.6 Performing a Software Update ..............72
10 Malfunctions......................................73
10.1 Status Messages ............................. 73
10.2 Warning Messages .......................... 73
10.3 Troubleshooting ............................. 76
11 Decommissioning.................................77
11.1 Decommissioning the Device.................77
12 Transport..........................................77
12.1 Transporting the Device ......................77
13 Storage and Shipping .............................78
13.1 Storage ......................................78
13.2 Returning Device and Parts..................78
14 Disposal...........................................79
14.1 Information on Decontamination............79
14.2 Dispose of Device and Parts .................79
14.2.1 Information on Disposal ..............79
14.2.2 Disposal ..............................79
15 Technical Data ....................................80
15.1 Dimensions and Weight .....................80
15.1.1 Semi-microbalance...................80
15.1.2 Analytical Balance ...................80
15.1.3 Precision Balance ....................80
15.2 Power Supply .................................81
15.2.1 Device.................................81
15.2.2 Power Supply Unit.....................81
15.2.3 Safety of Electrical Equipment ........81
15.2.4 Electromagnetic Compatibility.......82
15.3 Ambient Conditions .........................82
15.3.1 Installation Site.......................82
15.3.2 Ambient Temperature for the
isoCAL Function .....................83
15.3.3 Protection Class......................83
15.4 Materials.....................................84
15.5 Integrated Clock.............................84
15.6 Backup Battery ..............................84
15.7 Metrological Data............................85
15.7.1 Models MCE225S | MCE225P |
MCE125S | MCE125P ................85
15.7.2 Models MCE524S | MCE524P |
MCE324S | MCE324P................86
15.7.3 Models MCE224S | MCE124S |
MCE5203S | MCE5203P ............87