Date Code 20010731 Testing and Troubleshooting 11-45
SEL-352-1, -2 Instruction Manual
Self-Test Failure: Temp After R_S Command
1. Record STA command and state of all outputs. Call the factory. Powering down the relay
will reset the logic.
FACTORY ASSISTANCE
The employee-owners of Schweitzer Engineering Laboratories are dedicated to making electric
power safer, more reliable, and more economical.
We appreciate your interest in SEL products, and we are committed to making sure you are
satisfied. If you have any questions, please contact us at:
Schweitzer Engineering Laboratories
2350 NE Hopkins Court
Pullman, WA USA 99163-5603
Tel: (509) 332-1890
Fax: (509) 332-7990
We provide prompt, courteous, and professional service.
We appreciate receiving any comments and suggestions about new products or product
improvements that would help us make your job easier.
To Next Page
Loading...
