Date Code 20010731 Distributed Network Protocol (DNP) 3.00 G-5
SEL-352-1, -2 Instruction Manual
FILL OUT THE FOLLOWING ITEM FOR MASTER DEVICES ONLY:
Expects Binary Input Change Events:
r Either time-tagged or non-time-tagged for a single event
r Both time-tagged and non-time-tagged for a single event
r Configurable (attach explanation)
FILL OUT THE FOLLOWING ITEMS FOR SLAVE DEVICES ONLY
Reports Binary Input Change Events when no
specific variation requested:
r Never
r Only time-tagged
ã Only non-time-tagged
r Configurable to send both, one or
the other (attach explanation)
Reports time-tagged Binary Input Change
Events when no specific variation requested:
ã Never
r Binary Input Change With Time
r Binary Input Change With Relative
Time
r Configurable (attach explanation)
Sends Unsolicited Responses:
r Never
ã Configurable (attach explanation)
r Only certain objects
r Sometimes (attach explanation)
ã ENABLE/DISABLE UNSOLICITED
Function codes supported
Sends Static Data in Unsolicited Responses:
ã Never
r When Device Restarts
r When Status Flags Change
No other options are permitted.
Default Counter Object/Variation:
r No Counters Reported
r Configurable (attach explanation)
ã Default object 20
r Default variation 6
r Point-by-point list attached
Counters Roll Over at:
r No Counters Reported
r Configurable (attach explanation)
ã 16 Bits
r 32 Bits
r Other Value
r Point-by-point list attached
Sends Multi-Fragment Responses: ãYes ❒No
In all cases of a configurable item within the device profile, the item is controlled by SEL-352
Relay settings.
To Next Page
