Schweitzer Engineering Laboratories SEL-387E - Instruction Manual

A-6 Firmware and Manual Versions Date Code 20080110
SEL-387E Instruction Manual
I NSTRUCTION M ANUAL
The date code at the bottom of each page of this manual reflects the creation or revision date.
Table A.4 lists the instruction manual release dates and a description of modifications. The most
recent instruction manual revisions are listed at the top.
Table A.4: Instruction Manual Revision History
Revision
Date
Summary of Revisions
This manual differs from the previous versions as follows:
20080110 Appendix A
− Added Ethernet Port Firmware subsection.
Appendix B
− Added F. Verify or Restart IEC 61850 Operation to Ethernet Port Firmware Upgrade Instructions
subsection.
Appendix H
− Added SEL ICD File Versions subsection.
− Added Table H.7: Logical Nodes Summary.
− Updated Table H.11: Logical Device: ANN.
This manual differs from the previous versions as follows:
20071025 Appendix A
− Updated for firmware versions R605 and R702.
This manual differs from the previous versions as follows:
20060829 Appendix H
− Corrected object model information.
− Added Logical Device table.
− Added more detail in Report Processing subsection.
− Added Protocol Implementation Conformance Statement (PICS) subsection.
This manual differs from the previous versions as follows:
20060801 Section 1
− Added Ethernet port information to Specifications.
Section 2
− Added new Figure 2.7.
Section 5
− Updated STATUS command example screen capture.
Section 6
− Added Ethernet port information.
− Added Telnet and Ethernet Port settings to the Setting Sheets.