EasyManua.ls Logo

Schweitzer Engineering Laboratories SEL-387E - Page 449

Schweitzer Engineering Laboratories SEL-387E
578 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Date Code 20080110 Firmware and Manual Versions A-13
SEL-387E Instruction Manual
Revision
Date
Summary of Revisions
Section 8
Text changes to reflect addition of Distributed Network Protocol (DNP) 3.00.
Added warning about changing default passwords to private passwords at relay installation on page
8-10.
Added notes about taking care when setting the date and time on pages 8-6 and 8-7.
Added Winding 1 and 2 current sum for power calculations.
Appendix A
Updated firmware versions.
Appendix D
Made typographical corrections.
Appendix E
Made typographical corrections.
Appendix G
Appendix added to reflect addition of Distributed Network Protocol (DNP) 3.00.
This manual differs from the previous versions as follows:
20000728 Section 3
Corrected equation on page 3-25.
Section 6
Added detailed information about differential element application and setting and overcurrent
protection.
This manual differs from the previous versions as follows:
20000606 Section 3
Corrected Figure 3.4: Differential Element Harmonic Blocking Logic and Figure 3.6: REF
Enable/Block Logic and made typographical corrections.
Section 6, Settings Sheets and Settings Sheets Example
Made typographical corrections.
Appendix A
Added firmware SEL-387E-R101-V0-Z001001-D20000606 to correct second-harmonic and fifth-
harmonic elements’ failure to block when required.

Table of Contents