Sealife DC2000 - Establishing a Wireless Connection; Using the Link 123 Plus App

76
UsingtheWirelessfunction
TheWiFifeatureallowsyoutowirelesslydownloadphotosandvideossavedonthecameratoa
smartphoneortabletrunningGoogleAndroidorAppleiOSoperatingsystem.Thewirelessfeature
alsoallowsyoutooperatethecameraremotelyandautomaticallydownloadphotos/videosasthey
arecapturewhileconnectedtoasmartdevice.
BeforeusingtheWirelessfunction,downloadandinstallthe“Link123Plus”
apptoyoursmart
devices.ThefreeappisavailableinGooglePlay(Android)orAppleStore(iOS).
Followthebelowstepstoestablishawirelessconnectionbetweenthecameraandyoursmartdevice.
DONOTpushtheWiFibuttononthecamera.ThepurposeoftheWiFibuttonisexplainedonpage
76.
Establishing a wireless connection:
1. Poweronthecamera.
2. LaunchtheLink123 PlusApponyoursmartdevice.
3. Select“Wakeup”onyoursmartdevicetodisplayalistofcameraswithinwirelessrange.Thelist
willincludeoneormorecamerasstartingwith“abcam”andfollowedby7digitscorresponding
tothecamera’sserial#.
4. Selectyourcamerafromthelist[theonethatmatchesyourcamera’sserial#.]
5. Afterwakingupthecamera,thecamerawilldisplayamessage,“Watingforthemobilephone
connection.”
6. GototheWiFiSettingsmenuonyoursmartdeviceandselectyourcamerafromthelistof
availablehotspots.Again,yourcameraname(SSID)willbedisplayedas“abcam”followedby7
digitscorrespondingtoyourcamera’sserial#.
7. Enterthedefaultpassword“12345678”.Thepasswordandcameraname(SSID)maybe
changedlateron.
8. ClosetheWiFisettingsmenuandlaunchtheLink123Plusappagain.
9. SelectOKonyoursmartdevice.
Note:Ifawirelessconnectionwassuccessfullyestablished,youwillseealiveviewfromthecamera
displayedonyoursmartdevice.Ifconnectionwasnotsuccessful,rebootyourcameraandstartover
atstep1.