Sealife DC2000 - Preparing the Camera and Housing for Underwater Use; Preparing the Inner Camera

90
• Donotexposehousingtodirectsunlightforprolongedperiodsoftime.
• Donotstorehousinginextremehightemperatures,suchasthetrunkofyourcar.
• Keepthehousingunlatchedwhenstoringformorethan3months.
Preparing the camera and housing for underwater use
Beforeyourdive,followtheseimportantstepstopreparetheinnercameraandhousingfor
underwateruse.
Preparingtheinnercamera
1) Insertmemorycardintocameraandfullychargethebattery.
2) Cleantherubberseal(A)locatedinsidethebatterydoorusingaslightlydampenedlint-free
cottoncloth.Allowthesealtoairdryforaminuteandclosethewaterproofdooronthecamera.
3) Cleanthecameralensusingaclean,lint-freecottoncloth.
4) Removethestrapfromtheinnercamera.Thestrapmayinterferewiththewaterproofseal.
5) Setthemodedialtounderwatermode
.
6) Pushthemenubuttonandselecttheappropriateunderwaterscenemode.Seepage43for
informationaboutsettingthecorrectunderwaterscenemode.