Sensia JISKOOT InSpec Sampler User Manual

SECTION 19: REMOTE IO MODULE InSpec Sampler Controller
90
19.5 REMOTE DIGITAL DEVICE
This page contains the items required to both configure and test a Remote Digital module.
The digital outputs can be set to on or off by clicking the ‘ON|OFF’ button or made to toggle
automatically by clicking the toggle button. The digital inputs show when a signal is present. Signal can be
inverted by selecting the checkbox.
Figure 43 – Remote DIGITAL 0, Option in Menu Sidebar for Setup and Test
19.6 REMOTE PULSE DEVICE
This page contains the items required to test a Remote Pulse Input module.
The pulse table shows the pulse number, the title, the raw pulse counter value, the pulses per cycle, the
pulse frequency and pulse circuit threshold. The pulse title and threshold can be edited.
Figure 44 – Remote PULSE 0, Option in Menu Sidebar for Setup and Test

Sensia JISKOOT InSpec Sampler Specifications

General

Brand	Sensia
Model	JISKOOT InSpec Sampler
Category	Controller
Language	English