SEW-Eurodrive MOVISAFE DCS B Series

116
Manual – MOVIDRIVE® MDX61B Safety Module MOVISAFE® DCS..B Option
9
Error and alarm messages
Diagnostics
Fatal error code F6805/6806, error 108, subcode 064/065
Error message Internal processing error in user program.
Remedy Replace the DCS..B option and send it together with error number to SEW Service for
further inspection.
Fatal error code F6807/6808, error 108, subcode 066/067
Error message Internal processing error in user program.
Remedy Replace the DCS..B option and send it together with error number to SEW Service for
further inspection.
Fatal error code F6809/6810, error 108, subcode 068/069
Error message Internal processing error of input element.
Remedy • Reload the configuration data. Next switch the DCS..B option off and on again.
• Consult SEW Service for the proper MOVISAFE
®
software version.
Fatal error code F6811/6812, error 108, subcode 070/071
Error message Internal processing error of input element.
Remedy • Reload the configuration data. Next switch the DCS..B option off and on again.
• Consult SEW Service for the proper MOVISAFE
®
software version.
Fatal error code F6813/6814, error 108, subcode 072/073
Error message Internal processing error in user program.
Remedy Replace the DCS..B option and send it together with error number to SEW Service for
further inspection.
Fatal error code F7423/7424, error 108, subcode 101/102
Error message Internal processing error PROFIsafe.
Remedy Replace the DCS..B option and send it together with error number to SEW Service for
further inspection.
Fatal error code F7429/7430, error 108, subcode 103/104
Error message Internal processing error PROFIsafe.
Remedy Replace the DCS..B option and send it together with error number to SEW Service for
further inspection.
Fatal error code F7501/7502, error 108, subcode 105
Error message Internal processing error PROFIsafe.
Remedy Replace the DCS..B option and send it together with error number to SEW Service for
further inspection.
Fatal error code F8205/8206, error 108, subcode 074/075
Error message Runtime error.
Remedy Replace the DCS..B option and send it together with error number to SEW Service for
further inspection.