Manual – MOVIDRIVE® MDX61B Safety Module MOVISAFE® DCS..B Option
91
6
Fieldbus connection via PROFIsafe
Startup
6.7.2 Setting the PROFIsafe address in the DCS21B option
You can set the F-Dest Add by choosing [Peripherals] / [Fieldbus] / [PROFIsafe
Parameter] from the menu.
1984311179
INFORMATION
• To apply the changes, click the [Accept] button. The changes in the MOVISAFE
®
Assist parameter setting interface are offline settings.
• To have the changes available online in the DCS21B option, you will first have to
transmit them to the DCS21B option.
To Next Page
Loading...