SEW-Eurodrive MOVISAFE DCS B Series

Manual – MOVIDRIVE® MDX61B Safety Module MOVISAFE® DCS..B Option
89
6
Fieldbus connection via PROFIsafe
Startup
6.7 Fieldbus connection via PROFIsafe
Using the MOVISAFE
®
Assist parameter setting software lets you read PROFIsafe
parameters and the PROFIsafe status during operation of the DCS12B option.
6.7.1 Diagnostics of the PROFIsafe communication status
The PROFIsafe status can be read via [Process diagnostics] / [Safety bus] / [PROFIsafe]
/ [DiagPROFIsafe] (see below figure).
INFORMATION
Refer to the following publications for additional information:
•"MOVIDRIVE
®
MDX61B Fieldbus Interface DFS12B PROFIBUS DP-V1 with
PROFIsafe" manual
•"MOVIDRIVE
®
MDX61B Fieldbus Interface DFS22B PROFINET IO with
PROFIsafe" manual
1984305419
00
I