Sharp XG-P25X

34
Multi
All Projector List: All the identifiable connected projectors are listed
here.
t All Projector List: Displays a list of all the identifiable connected
projectors.
The information displayed in “All Projector List” is as follows:
● Power : When the power supply of a projector is ON, the
green icon is displayed. When it is OFF, the red
icon is displayed. (For a projector assigned as a
backup, “B” is attached to the icon.)
When an error occurs in a projector, an “!” mark is
displayed.
● Projector : Projector Name
● ID : ID Number
● Port : Port the projector is connected to (COM or LAN)
● Group : Group Name the projector belongs to
● Input : Selected Input Mode
● Lamp : Accumulative usage time of a lamp (when more
than two lamps are used, the accumulative usage
time of the longest used lamp is displayed) or
remaining lamp life in percentage.
● Status : Status of a projector
● Vol : Volume
● Info : Resolution or signal type of a projected image
● COM : Transmission status (“OK” or “ERR”)
● Backup : When another projector stands by as a backup
projector, the ID Number, Port and Projector Name
of the backup projector are displayed. When a
projector is assigned as the backup of another
projector, the ID Number, Port and Projector Name
of the projector which is backed up is displayed.
y Refresh all the display information
u Refresh the displayed information for the selected projector with
the most recent information.
i Jump to “Advanced Control for Adjustment” to conduct adjustments
for the selected projector.
Some items may not be displayed, depending on the type of projector.