Shinko PCB1 - OUT2 (Heating;Cooling Control) Action (When Setting Overlap Band)

- 111 -
10.7 OUT2 (Heating/Cooling control) Action (When Setting Overlap band)
: Turns ON (Lit) or OFF (Unlit).
: Represents Heating control action.
: Represents Cooling control action.
OFF
ON
SV
OFF
ON
12 V DC 12/0 V DC 0 V DC
20mA DC 20 to
4mA DC
4 mA DC
4 mA DC
4 to 20 mA DC
20 mA DC
0 V DC 0 /12 V DC 12 V DC
⑮
⑯
⑮
⑯
⑮
⑯
⑮
⑯
⑮
⑯
⑮
⑯
⑮
⑯
⑮
⑯
⑮
⑯
⑲
⑳
⑲
⑳
⑲
⑳
⑲
⑳
⑲
⑳
⑲
⑳
⑲
⑳
⑲
⑳
⑲
⑳
Cycle action is performed
according to deviation.
Changes continuously
according to deviation.
Cycle action is performed
according to deviation.
Cycle action is performed
according to deviation.
Cycle action is performed
according to deviation.
Changes continuously
according to deviation.
Relay contact
output
(OUT2)
Relay contact
output
(OUT1)
Non-contact
voltage output
(OUT2)
Non-contact
voltage output
(OUT1)
Direct current
output
(OUT2)
Direct current
output
(OUT1)
Indicator (OUT)
Indicator (EV2)
Lit
Unlit
Lit
Unlit
Control
action
Heating
action
(Cooling
action)
Heating P-band
(Cooling P-band)
Overlap band