- 139 -
Characters,
Factory Default
Setting Item, Setting Range Data
t2of
1 00:00
TS2 output OFF time
Setting range:
00:00 to 99:59 (Time unit follows the selection in [Step time unit].)
Available when /015 (Time signal output) is selected in [Event output EV2
allocation].
t2on
1 00:00
TS2 output ON time
Setting range:
00:00 to 99:59 (Time unit follows the selection in [Step time unit].)
Available when/015 (Time signal output) is selected in [Event output EV2
allocation].
a3//
1 ///0
EV3 alarm value
Setting range: Same as those of EV1 alarm value.
Available when /001 (High limit alarm) to /
(
012 High/Low limits with standby
independent alarm) is selected in [Event output EV3 allocation].
a3h/
1 ///0
EV3 high limit alarm value
Setting range: Same as those of EV1 alarm value.
Available when /004 (High/Low limits independent alarm), /006 (High/Low
limit range independent alarm) or /012 (High/Low limits with standby
independent alarm) is selected in [Event output EV3 allocation].
t3of
1 00:00
TS3 output OFF time
Setting range:
00:00 to 99:59 (Time unit follows the selection in [Step time unit].)
Available when /015 (Time signal output) is selected in [Event output EV3
allocation].
t3on
1 00:00
TS3 output ON time
Setting range:
00:00 to 99:59 (Time unit follows the selection in [Step time unit].)
Available when/015 (Time signal output) is selected in [Event output EV3
allocation].
To Next Page
