Shinko PCB1 - Page 146

- 146 -
Characters,
Factory Default
Setting Item, Setting Range Data
cmno
/ ///0
Instrument number
Setting range: 0 to 95
Available when C5W or C5 option is ordered.
cmsp
/ //96
Communication speed
//96 9600 bps
/192 19200 bps
/384 38400 bps
Available when C5W or C5 option is ordered.
cmft
/ 7evn
Data bit/Parity
8non 8 bits/No parity
7non 7 bits/No parity
8evn 8 bits/Even
7evn 7 bits/Even
8odd 8 bits/Odd
7odd 7 bits/Odd
Available when C5W or C5 option is ordered.
cmst
/ ///1
Stop bit
///1 1 bit
///2 2 bits
Available when C5W or C5 option is ordered.
cmdy
/ //10
Response delay time
Setting range: 0 to 1000 ms
Available when C5W or C5 option is ordered.
sv_b
/ ///0
SVTC bias
Setting range: 20% of input span
DC voltage, current inputs: 20% of scaling span (The placement of
the decimal point follows the selection.)
Available when C5W, C5 option is ordered, or when svtr [Set value digital
reception (Shinko protocol)] is selected in [Communication protocol].