Shinko PCB1 User Manual

- 2 -
Preface
Thank you for purchasing our programmable controller PCB1. This manual contains instructions for the
mounting, functions, operations and notes when operating the PCB1. To prevent accidents arising from the
misuse of this controller, please ensure the operator receives this manual.
Abbreviations used in this manual
Abbreviation Term
PV
Process variable
SV
Desired value
MV
Output manipulated variable
OUT1
Control output OUT1
OUT2
Control output OUT2
AT
Auto-tuning
Characters used in this manual (/: No character is indicated)
Indication
! 0 1 2 3 4 5 6 7 8 9 C f
Number, /
-1 0 1 2 3 4 5 6 7 8 9
Indication
a b c d e f g h i j k l m
Alphabet
A B C D E F G H I J K L M
Indication
n o p q r s t u v w x y z
Alphabet
N O P Q R S T U V W X Y Z
Notes
• This instrument should be used in accordance with the specifications described in the manual.
If it is not used according to the specifications, it may malfunction or cause a fire.
• Be sure to follow the warnings, cautions and notices. If they are not observed, serious injury or malfunction
may occur.
• The contents of this instruction manual are subject to change without notice.
• Care has been taken to ensure that the contents of this instruction manual are correct, but if there are any
doubts, mistakes or questions, please inform our sales department.
• This instrument is designed to be installed through the control panel. If it is not, measures must be taken to
ensure that the operator cannot touch power terminals or other high voltage sections.
• Any unauthorized transfer or copying of this document, in part or in whole, is prohibited.
• Shinko Technos Co., Ltd. is not liable for any damage or secondary damage(s) incurred as a result of using
this product, including any indirect damage.

Shinko PCB1 Specifications

General

Brand	Shinko
Model	PCB1
Category	Controller
Language	English