SICK FLOWSIC100 Flare

158 FLOWSIC100 Flare · Operating Instructions · 8013344/11L2/V 2-5/2018-10 · © SICK Engineering GmbH
Start-up and Parameter Settings
Subject to change without notice
Fig. 89 Saving the scan settings
4.1.3.3 Connecting to the device with advanced mode
1 Click “Search settings”.
2 Select search mode “Interface oriented search”.
3 Select the communication interfaces where the search is to be made and click “Next”.
Fig. 90 Selecting the communication components
4 Configure the interfaces and click “Next”.