SICK FLOWSIC100 Flare

192 FLOWSIC100 Flare · Operating Instructions · 8013344/11L2/V 2-5/2018-10 · © SICK Engineering GmbH
Start-up and Parameter Settings
Subject to change without notice
The stored values can be exported in small or large format.
Content of file when exporting "Small Format":
● Date & Time
● Counted volume s.c. total [Nm³]
● Counted mass total [kg]
● Gas temperature, average during last recording period [°C]
● Gas pressure, average during last recording period [bar]
● Molar mass [g/mol]
● AGC (Amplifier gain control), average during last recording period
● Performance, average during last recording period
● Meter status
Content of file when exporting "Large Format":
● Date & Time
● Counted volume a.c. total [m³]
● Counted error volume a.c. total [m³]
● Volume flow a.c., average during last recording period [m³/h]
● Counted volume a.c., collected during last recording period [m³]
● Counted volume s.c. total [Nm³]
● Counted error volume s.c. total [Nm³]
● Volume flow s.c., average during last recording period [Nm³/h]
● Counted volume s.c., collected during last recording period [Nm³]
● Counted mass total [kg]
● Counted error mass total [kg]
● Mass flow, average during last recording period [kg/h]
● Counted mass, collected during last recording period [kg]
● Gas temperature, average during last recording period [°C]
● Gas pressure, average during last recording period [bar]
● Molar mass [g/mol]
● Gas density a.c. [kg/m³]
● AGC (Amplifier gain control), average during last recording period
● Performance, average during last recording period
● Meter status