Getting to Know your System
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual
4-15
For internal distribution only Installation
Module Installation Procedure
Installation on a 19" Rack
Rack-Mounting Procedure
Step Procedure
1. Insert module into the appropriate slot.
2. Move the latch to the right to secure each module in place.
3. Secure each latch using the screws.
4. Use the reverse procedure to remove the modules.
Figure 4-15 Installing the HiPath 1190R on a 19" rack
Step Procedure
1. Install the system’s brackets on the 19" rack using the screws as shown.
2. Insert the switch into the 19" rack.
3. Secure the switch on the 19" rack using the screws.
To Next Page
Loading...
