HiPath 1100 Configurations
System Data For internal distribution only
A31003-K1250-S100-12-7619
2-2 HiPath 1100, Service Manual
2.3 HiPath 1100 Configurations
HiPath 1100 systems are designed to meet the requirements for a wide range of cli-
ents and are, therefore, offered in the following configurations:
● HiPath 1120: Wallmount, standard configuration for 2 external lines, 8 exten-
sions and 4 system telephone interfaces. It provides a total maximum capacity
for 6 external lines, 16 extensions and 4 system telephone interfaces.
● HiPath 1130: Wallmount, standard configuration for 2 external lines, 10 exten-
sions and 8 system telephone interfaces. It provides a total maximum capacity
for 17 external lines, 20 extensions and 8 system telephone interfaces.
● HiPath 1150: Wallmount, standard configuration for 2 external lines, 10 exten-
sions, 8 system telephone interfaces. Depending on the combination of mod-
ules used in slots 1 to 4, the system can be configured for a maximum of 10 ex-
ternal lines, 50 extensions and 8 system telephones interfaces; or 16 external
lines, 40 extensions and 8 system telephone interfaces; or 17 external lines, 46
extensions and 8 system telephone interfaces (see “Modules Location” on page
4-16).
● The HiPath 1190 comes in two versions:
● HiPath 1190: External cabinet with one CPU, 2 backplanes, 3 power sup-
plies units, and 2 connection boards. It can hold up to 21 modules (expan-
sion and option modules).
● HiPath 1190R: Rackmount cabinet in a standard 19” rack with a CPU, 2
backplanes, 3 power supplies units, and 2 connection boards. It can hold up
to 21 modules (expansion and option modules).
For information about country-specific versions please ask one of our distributors.
To Next Page
Loading...
