Documentation List
System Data For internal distribution only
A31003-K1250-S100-12-7619
2-10 HiPath 1100, Service Manual
Servicing Conditions (Mechanical)
● This system was essentially designed for installation at a fixed location.
2.8 Documentation List
Warning
● To avoid condensation when shipping the system in extremely low tempera-
tures keep the equipment in its packaging until it reaches room temperature.
Proceed thereafter with the installation (acceptable temperature range: 45.5°F/
30 min)
● Do not expose the equipment to direct sunlight or place it in the proximity of any
heat sources (to avoid a localized increase of temperature)
● Make sure the installation area is dry. During system operation avoid any condi-
tions that may cause condensation.
● Install the equipment in a ventilated area where there is no risk of exposure to
direct sunlight.
● Forced ventilation is not required.
● Do not block the natural flow of air around the equipment.
● Do not expose the equipment to the weather.
Table 2-7 Documentation List for HiPath 1100
Documentation Order Number
User Manual A31003-K1250-B811-*- **19
Programming Manual A31003-K1250-B812-*- **19
Standard and System Telephones Quick Refer-
ence Guide
A31003-K1250-B813-*- **19
System Telephones Instruction Manual A31003-K1250-B814-*- **19
Attendant Console Quick Reference Guide A31003-K1250-B815-*- **19
Warranty Certificate (Brazil only) A30817-X831-V10-*- 76K5
Service Guide (Brazil only) A30808-X5226-V104-*- 76F7
Client’s Documentation Kit A31003-K1250-B800-*-**19
Options (Brazil)
Interaction Center Smart User Manual A30808-X5226-E175-*-7618
TAC Smart Quick Reference Guide A30808-X5226-V103-*-7619
!
To Next Page
Loading...
