Siemens HiPath 1130 - Programming an Extension

Table of the System’s Programming Codes
Configuring the System Specifically for the Client For internal distribution only
A31003-K1250-S100-12-7619
7-6 HiPath 1100, Service Manual
Programming an Extension
Table 7-6 Programming an Extension
Programmed
Functions
Cod
e
Intermediate Data Data to be
Programmed
Completing
Data Entry
Default
Pickup Groups 43 Pickup groups 01 to 16 extension or
∗ - To delete a group
# instead of
extension
None
Call Groups (CG) 13 Call Group (CG) extension (up to 10)
∗ - To delete
# instead of
extension
Extensions 11/
101 to 20/110
Alert Ring Timeout
for Pickup Groups
035 Time: 00 to 59 seconds or
∗ - To disable
Automatic
∗ - To disable
Callback/Urgent Call
activation by time-
out
037 ∗ - To enable
# - To disable
Automatic # - To disable
Caller ID by name or
number
039 1 - Name and Number
2 - Name
3 - Number
Automatic 1 - Name and
Number
UCD Subscriber
Groups
023 UCD Subscriber Group Extension (up to 32 agents)
∗ - To delete
# instead of
group
None
Collect Call Barring
for a UCD
Subscriber Group
007 UCD Subscriber Group
∗ - To enable
# - To disable
# instead of
group
# - (To disable)
Message Waiting
for UCD queue
024 UCD Subscriber Group extension or
∗ - MOH (Music on Hold)
# instead of
group
∗ - MOH
UCD Queue size 025 UCD Subscriber Group 00 to 99 slots # instead of
group
99 slots
Time for Message
Waiting connection
to UCD Queue
026 UCD Subscriber Group (00 to 99) in 5-second cycles # instead of
group
0
UCD overflow call
destination
027 UCD Subscriber Group Extension or UCD Group
or
∗ - To delete
# instead of
group
None
Round-robin distri-
bution to agents
028 UCD Subscriber Group
∗ - To enable
# - To disable
# instead of
group
∗ - To enable
Time for Agent’s
Notes
029 UCD Subscriber Group (00 to 99) in 5-second cycles # instead of
group
00 (0 seconds)
Ring Signal Time at
an Agent
030 UCD Subscriber Group (01 to 99) in 5-second cycles # instead of
group
06 (30
seconds)
Time in UCD Queue 031 UCD Subscriber Group (00 to 99) in 5-second cycles # instead of
group
12 (1 minute)
On Hold Message
before Signaling
UCD Call
032 UCD Subscriber Group
∗ - To enable
# - To disable
# instead of
group
# - To disable