Table of the System’s Programming Code
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual
7-5
For internal distribution only Configuring the System Specifically for the Client
Flash duration 18 External analog line 05 to 99
05 - 50 ms
99 - 990 ms
# instead of
external line
Country
*
Reseizure time for
external line
29 05 to 99
05 - 500ms
99 - 9900ms
Automatic 05 - 500 ms
Maximum time
between rings for
an incoming call
17 05 to 20 seconds Automatic 13 seconds
for Argentina,
06 seconds
for all other
countries
Coefficient for an
external analog line
47 External analog line 1 - Standard line, 900 Ω
2 - 600 Ω line
3 - Long line
4 - Short line
# instead of
external line
1 - Standard
line
Polarity Inversion
**
58 External analog line ∗ - Yes
# - No
# instead of
external line
# - No
Dial tone detection 60 External analog line ∗ - Yes
# - No
# instead of
external line
∗ - Yes
External line
connection.
33 External analog line 1 - Direct
2 - Satellite PABX
# instead of
external line
1 - Direct
Second external
access code
34 0 to 9 or
00 to 99 or
none (no code)
5 seconds
timeout
0
Auto-Seizure Mode
for an External Line
036
∗ - Yes
# - No
Automatic # - No
False tone 063 # - No: Brazil, Argentina and
India
∗ - Yes: all other countries
Automatic # - No: Argen-
tina and India
External analog
present
079 External Line
∗ - Yes
# - No
# instead of
external line
∗ - Yes
Waiting time for a
Second Attendant
to answer a call on
an external analog
line
083 External Line (00 to 99) in 5-second
cycles
Automatic 06 (30 s)
* 24/10 for Brazil, Chile, Venezuela, Mexico, Vietnam, IM, China, Pakistan and the Ukraine
35/10 for Argentina 30/08 for Thailand, Malaysia and Singapore 18/10 for Portugal
9/9 for Spain 30/9 for India
27/9 for Greece.
8/8 for Russia
** Ask local carrier about availability.
Table 7-5 External line settings
Programmed
Functions
Cod
e
Intermediate Data Data to be
Programmed
Completing
Data Entry
Default
To Next Page
Loading...
