Starting the Programming Mod
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual
6-19
For internal distribution only Operation
8. A message appears indicating that the hardware selected is installed. Click "Fin-
ish" to complete installation.
9. The HiPath 1000 (CAPI Interface) installation will now be launched. The window
with the warning about a Microsoft digital signature appears twice. Click "OK" ev-
ery time it appears.
10. In the ISDN - HiPath 1000 window select “European ISDN (DSS1)“ then click
“Next“.
Figure 6-14 Windows 2000 - Port setting
Figure 6-15 Windows 2000 - ISDN selection
To Next Page
Loading...
