Siemens HiPath 1130 - Figure 6-3 Hipath 1100 Manager Configuration - Analog Modem

Starting the Programming Mod
e
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual
6-9
For internal distribution only Operation
8. After restarting the computer, check the default modem (US Robotics) configu-
ration on the HiPath 1100 Manager and change the following settings to match
your modem (see the modem’s manual, if necessary):
9. On the HiPath 1100 remote system, check the default modem configuration (US
Robotics) and change the following settings on the CommServer to match your
modem (see the modem’s manual, if necessary):
Figure 6-3 HiPath 1100 Manager Configuration - Analog Modem