Siemens HiPath 1130 - Hipath 1190

Motherboard (MB)
Modules For internal distribution only
A31003-K1250-S100-12-7619
3-14 HiPath 1100, Service Manual
MB Connector Assignments (HiPath 1130/1150)
3.4.3 HiPath 1190
Outputs/Inputs
● 8 interfaces for system telephones (C/D)
● Connection for external music source and GND (0V)
● Mini DIN-6 connector for V.24 adapter
● Mini DIN-4 connector for USB adapter
● Connection for Fax/DID module
● Connection for backplane
Table 3-6 HiPath 1130/1150 MB connector assignments
Contact X5
Connector
X6
Connector
X7
Connector
X8
Connector
X11
Connector
X12
Connector
1 a1 - trunk 1 a3 - exten-
sion 3
a7 - extension
7
-- C-interface 1 C-interface 5
2 b1 - trunk 1 b3 - exten-
sion 3
b7 - extension
7
-- D-interface 1 D-interface 5
3 a2 - trunk 2 a4 - exten-
sion 4
a8 - extension
8
Music - A
wire
C-interface 2 C-interface 6
4 b2 - trunk 2 b4 - exten-
sion 4
b8 - extension
8
Music - B
wire
D-interface 2 D-interface 6
5 a1 - extension
1
a5 - exten-
sion 5
a9 - extension
9
C-interface 3 C-interface 7
6 b1 - extension
1
b5 - exten-
sion 5
b9 - extension
9
D-interface 3 D-interface 7
7 a2 - extension
2
a6 - exten-
sion 6
a10 - extension
10
C-interface 4 C-interface 8
8 b2 - extension
2
b6 - exten-
sion 6
b10 - extension
10
D-interface 4 D-interface 8
X1
Connector
X2
Connector
X3
Connector
X4
Connector
X9
Connector
X10
Connector
Backplane,
slot 1 and 2
*
* Slots used only on HiPath 1150.
Power
supply (PSU)
Backplane
Slot 3 and 4*
Fax/DID
Module
USB
Interface
V.24 Serial
interface