Siemens HiPath 1130 - TME1 Module

Option Modules (MO
)
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual
3-27
For internal distribution only Modules
Connector Assignments
S
0
Basic Access
S
0
Module Connector
3.6.2 TME1 Module
Introduction
The TME1 Module is a Digital Interface Unit (DIU) used for connecting the
HiPath1130/1150/1190 to the PSTN via an E1 trunk. The E1 trunk can carry 30 digital
voice channels. However, the HiPath 1130/1150 systems use 15 channels, while the
HiPath 1190 systems use up to 30 channels with the TME1 module allocated to slot
1 and up to 15 channels when it is allocated to slot 11.
Ta b l e 3 - 1 8 S
0
module connectors HiPath1130/1150/1190
X1 Connector X2 Connec-
tor
X3 Connec-
tor
X4 Connec-
tor
X5 Connec-
tor
X6 Connec-
tor
Connection to the MB is
through a pin connector
RJ 45 RJ 45 RJ 45 RJ 45 RJ 45
Figure 3-14 S
0
Basic Access Connection
Figure 3-15 S
0
connector signal distribution
Cable 4-wire
HiPath 1100
S
0
NT
Public Network
3 = SX +
4 = SR -
5 = SR +
6 = SX -
1 8
SX = Signal Transmit
SR = Signal Receive
X
RJ 45
2 = NC
1 = NC
8 = NC
7 = NC