Table of the System’s Programming Code
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual
7-11
For internal distribution only Configuring the System Specifically for the Client
General settings
Table 7-9 General settings
Programmed
Functions
Cod
e
Intermediate Data Data to be
Programmed
Completing
Data Entry
Default
Music on Hold 36 0 - No music
1 - To activate external
source
2 - To activate external
source - extension
3 - To activate internal
source
4 - To activate internal PCM
source
Automatic 3 - To activate
internal
source
Assigning Exten-
sions to MOH
Groups
087 1 or 2 - MOH Group extension or
∗ - To delete
# instead of
extension
None
Music source for
the MOH Group
088 1 or 2 - MOH Group 0 - No music
1 - External music source
2 - External music source
(extension
3 - Internal music source
4 - To activate internal PCM
source
# instead of
group
0 - No music
Music Source
Extension
089 1 or 2 - MOH Group Extension or
∗ - To delete
# instead of
group
None
External Music
Source - Extension
Assignment
064 extension or
∗ - To delete
Automatic None
Setting the time for
an external Room
Monitor
69 Connection time: 01 to 99
seconds
Automatic 10 seconds
Types of caller lists 049 1 - External
2 - Internal and external
Automatic 2 - Internal and
external
Deleting digits from
the Caller List
71 Initial sequence of digits (up
to 6 digits)
5-second time-
out
None
Date/Time - Manual
setting
14 DD - Day, from 1 to 31
MM - Month, from 1 to 12
YY - Year, from 00 to 99
HH - Hour, from 00 to 23
MlMl - Minutes, from 00 to
59
Automatic
Updating Date/Time
while using an ISDN
Line
038
∗ - To enable
# - To disable
Automatic ∗ - To enable
Call Charge Unit 95 Value: 00000 to 99999
+
Comma position: 0 to 4
Automatic factor - 00001
slot - 0
To Next Page
Loading...
