Siemens HiPath 1130 - Figure 6-7 Windows 98 SE - Selection for ISDN; Figure 6-8 Windows 98 SE

To Next Page

To Previous Page

Starting the Programming Mod

A31003-K1250-S100-12-7619

HiPath 1100, Service Manual

6-15

For internal distribution only Operation

6. A message will appear indicating that Setup will search for a driver for the HiPath

1000. Repeat hardware driver installation (steps 1 through 4) for the following

components:

● HiPath 1000 Virtual COM Port

● HiPath 1000 (CAPI Interface).

7. During installation of the HiPath 1000 (CAPI Interface) configure these two set-

tings:

● In the next window select "EUROISDN (DSS1)" and click "Next":

● In the "Phone # (MSN)" field enter an available internal telephone number. Con-

firm by clicking “Next.“ The same window appears again. Click "Next" one more

time without entering anything in any field:

10. The installation of the USB drivers is now completed. CAPI applications installa-

tion will now start automatically (see “Installing CAPI Applications” on page 6-23).

Figure 6-7 Windows 98 SE - selection for ISDN

Figure 6-8 Windows 98 SE - MSN Number

Siemens HiPath 1130 - Figure 6-7 Windows 98 SE - Selection for ISDN; Figure 6-8 Windows 98 SE - MSN Number