Siemens HiPath 1130 - Table 4-5 Example of Extension Locations on the Hipath 1130;1150 Main Distribution

Connecting Extensions to the System’s Internal MDF (Main Distribution Frame
)
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual
4-35
For internal distribution only Installation
To access the inside of the Main Distribution Frame remove the safety latch using a
small screwdriver (See Figure 4-5). After completing the procedure on the system’s
Main Distribution Frame, replace the safety latch.
Note: Slots 2 and 4 are used only with the HiPath 1150 system.
Table 4-5 Example of extension locations on the HiPath 1130/1150 Main Distribution Frame
Slot
External
Digital
Exten-
sion
slot
Internal
Number
MB
01 801
02 802
a/b
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Slot
External
Digital
Exten-
sion
slot
Internal
Number
EB 210
Internal
Number
EB 206
Internal
Module
Number
Internal
Number
Module
Internal
Number
EB 400
Internal
Number
EB 800
Slot 1
03 803 803 803 803 803 803
04 804 804 804 804 804 804
a/b
11 21 21 21 805 805
12 22 22 22 806 806
13 23 23 807
14 24 24 808
15 25 25 809
16 26 26 810
17 27
18 28
19 29
20 30
Slot
External
Digital
Exten-
sion
slot
Internal
Number
EB 210
Internal
Number
EB 206
EB 202
Module
Internal #
Internal
Number
EB 200
Internal
Number
EB 400
Slot 2
(HiPath 1150 only)
05 805 805 805 805 807
06 806 806 806 806 808